Everything you need to know about grit sandpaper for sanding drywall
Which Sandpaper Grit for Drywall
Sanding drywall is a critical step that determines the quality of your finished walls. Even the best joint compound application can seem imperfect if the sanding is not handled with care. Knowing which grit sandpaper to use for drywall to use at different stages ensures that your surface becomes paint-ready and professional. The process is based on finesse and proper grit selection.
When performed carefully, drywall sanding levels joints, eliminates imperfections, and results in a flawless, professional-looking surface ready for painting.
Why Sandpaper Grit Matters in Drywall Finishing
The grit number on sandpaper indicates how coarse or fine the abrasive surface is. A lower number means the sandpaper is coarse and removes material quickly, while a finer number produces refined results. Choosing the right grit size for drywall prevents damage such as surface gouging, swirl marks, or uneven patches.
If the grit is too coarse, it can expose joint tape or leave swirl marks that show up under paint. If it’s too fine too early, it can fail to remove ridges effectively. The goal is to move in a stepwise progression of grits for a seamless finish.
Ideal Grit Sequence for Sanding Drywall
Professional drywall finishers typically follow a multi-stage grit progression to achieve optimal results:
• 100–120 grit: Best for the first sanding pass to remove heavy ridges after joint compound application. This grit should be used lightly to prevent surface tearing.
• 120–150 grit: Used for intermediate sanding once the major imperfections are removed. This grit provides the main surface refining phase.
• 180–220 grit: Best for pre-paint sanding. It creates a consistent surface without marks.
This sequence ensures each layer of compound is refined properly, resulting in a durable wall.
Tools and Equipment for Sanding Drywall
Using proper tools is as important as selecting the right grit. Quality equipment helps maintain smooth contact, reduces fatigue, and keeps dust under control.
Common tools include:
• Hand sander for detail work
• Pole sander for high or wide wall sections
• Sanding sponges for corners and curved areas
• Perforated sandpapers for dust reduction
• Protective gear to avoid inhalation
• Work light or inspection light to spot imperfections
These tools help ensure smooth, uniform results without damaging the drywall paper.
Step-by-Step Drywall Sanding Guide
Sanding drywall is a careful process. Following professional techniques prevents visible defects and ensures your work looks professional once painted.
1. Let the Joint Compound Dry Completely
Always wait for the compound to dry fully before sanding. Partially dried mud will smear and ruin your finish. Fully cured compound turns into fine dust when sanded, allowing for consistent texture.
2. Apply Light, Even Pressure
Avoid pressing too hard. Let the sandpaper do the work while maintaining steady strokes. Excessive pressure can expose tape.
3. Feather the Edges
Blend the joint compound smoothly into the drywall using long, even strokes. Focus on seams rather than flat surfaces to create a invisible appearance.
4. Use Angled Lighting
Shine a light across the wall’s surface to highlight flaws that might not be visible head-on. This ensures all marks are addressed before painting.
5. Switch to Finer Grit for Final Passes
Once the wall feels flat and smooth, move to 180–220 grit sandpaper. This stage perfects the finish and prepares the wall for priming what grit sandpaper for drywall before painting or painting.
Sanding Corners and Tight Spots
Corners and edges need gentle technique. Use a fine-grit sanding sponge or folded sandpaper to reach these areas. Sand one side at a time with controlled movement to avoid damaging the tape or paper.
For inside corners, a few light passes are usually enough to eliminate ridges without thinning the surface material. Careful motion is the key to maintaining joint integrity.
Drywall Sanding Errors to Watch For
Many DIY finishers make the mistake of being too aggressive or skipping crucial steps. To achieve a professional outcome, avoid the following:
• Cutting into the drywall surface
• Choosing the wrong grit
• Pressing too hard and damaging drywall paper
• Failing to identify imperfections
• Not using protective gear
Time, care, and accuracy matter more than speed during drywall sanding.
Final Steps Before Painting Drywall
Before applying paint, ensure that the wall is completely free from dust and residue. Wipe the surface with a microfibre cloth or a vacuum attachment designed for drywall dust. Check all areas under angled light to confirm a consistent finish. Using 180–220 grit sandpaper for drywall before painting ensures a flawless and receptive surface for primer adhesion.
A properly sanded wall allows primer and paint to bond evenly, preventing visible marks and ensuring a clean, flawless finish.
Wrapping Up
Mastering the correct drywall sanding grit to use at each stage can dramatically enhance the quality of your walls. Start with medium grit to remove rough patches, move to finer grits for blending, and finish with ultra-fine sanding for that perfect surface.
By combining the right tools, lighting, and a steady approach, you can achieve a high-end drywall finish that looks impeccable under any paint or lighting condition. Careful sanding and control are the true secrets to expert-level drywall finishing.